Past Projects
EVS 1000 Infrared
Camera project.
Universal 270Mb
D1 serial digital Video to analog RGB converter
product on one 8 layer low noise PCB for Pixel. This
was released back in the mid 1990s as an
option for standard analog video synchronizer
products. Complete electrical design from concept to
production. This includes Serial digital to three
analog output circuit design with transistors, logic
gates, PLL chip, PAL 22V10 Logic programming and
analog gating circuits.
High speed 512Meg
RAM 16 bit PC memory board for Thunder Creative
Technologies. This 9 layer board is made
with controlled impedance Polyimide material for 600
to 800Mhz data clock speeds. This board is done using
popular Jedec specifications for PC DDRmemory and can
plug into a standard PC RAM DDR memory slot.
Site Master S251
I designed the main control board for this RF
Instrument.
This hand held network analyzer product used to test
cable and antenna products at installation sites
around the world. It can measure with 90db dynamic
range Insertion Loss, VSWR and Return Loss to about
3Ghz. http://www.us.anritsu.com/products/ARO/North/Eng/showProd.aspx?ID=96&lc=Eng&cc=US&rc=ARO
Sage
Three of my designs, and 2,100 plus have shipped to
customers.
http://www.gnss.com/products.phtml
As a
former employee of Pixelvision of Oregon, I carefully
designed each and every circuit board for this
camera. This one is very special. There are 12 CCD'S
in this one made by SITe. Open the following 1 Meter
camera project for the Japan Space Forum. This camera
is made for finding Near Earth Objects such as
asteroids. It is truly made for asteroid research.
http://www.nasda.go.jp/lib/nasda-news/2000/09/head_e.html
http://www.spaceguard.or.jp/GALLERY/gallery_v_e.html
As a consultant to Scientific Imaging Technologies
(SITe), this customized system has many of my
designs
http://solis.nso.edu/instruments.html
The first 25 PCB designs were at JTS
Corporation back in 1996. This group was making state
of the art 2Gbyte, Ultra-Dma, IDE Hard Drives
marketed as Champion and Palladium. These PCB designs
were very fine pitch routing with 0603, 0402 sized
smt parts. As I recall our group ordered 75,000 of
one of my best designs. Scroll down and see Other
Makers JTS.
http://www.redhill.net.au/d-maker.html
Recently while at Pixelvision of Oregon a 2X2 and 3X3
sync board and Camera CCD Simulator/Emulator was
needed for this product to sync multiple cameras in
one system for one image. The CCD Simulator was done
for the Thompson 2K X 2K TH7899 CCD.
http://www.adsc-xray.com/products.html
Here
is a new camera that has been designed recently. Open
the following website and see the new Velocicam
product designed for scientific, hyperspectroscopy
and astronomy applications. Each circuit board was
designed for high speed and low noise imaging.
http://www.pvinc.com/products.html
>>> Next page
>>>
|
